Store: Select 'Stone Island'.
Size: User Preference.
Monitor Input: SKU is the only monitor input supported. For example, if you wish to target 'https://www.stoneisland.com/en-gb/collection/knitwear/turtleneck-jumper-with-ribbed-trims-5100075-pure-light-rws-wool-stone-island-ghost-K2S155100075S00FCV0070.html' you would use 'K2S155100075S00FCV0070' as your input.
Profiles: Select your Profile Group(s) or Profile(s).
Proxies: Select your Proxy Group. We recommend running a mix of a few local tasks, some ISP tasks, and some residential tasks.
Accounts: Not required for all releases, but supported regardless.
When To Start Tasks: You should start around 5 minutes before release at delays of around 5000/5000 and then drop your delays to around 2500/2500 around 10 seconds before release time.
Modes:
The Stone Island module supports various modes please see below for a description of each!
- Normal
This is the mode you'll use for most, if not all, releases and restocks.
- Preload
If you have a scheduled date/time for a release you may use the 'Preload' mode for a quicker checkout flow.
- Account Registration
This mode will register accounts using your profile email address and then store them inside your 'Accounts' tab. Some Stone Island releases require accounts such as New Balance collaborations.
- Phone Verification
Use this mode when phone verification is enabled.
Stone Island Notes:
- If running accounts, please run 1 task per account. Running greater than 1:1 is risky due to the way we preload carts. This is important to take note of.